There are plenty of reasons why motorists get into a collision. The most common reasons include car breakdown, weather, distractions such as mobile phone use, speeding, driving under the influence [DUI], etc. Whatever the reason for the collision, it usually results in vehicle damage that requires some minor or major car repairs.

After a collision, one of the critical steps is to assess the damage and get the car repaired by a professional. Depending on the severity of damage, there are a few steps you need to take. You need to ensure that you get the necessary repairs done to make the car safe to drive again.

If your car is badly damaged as a result of a collision, then it needs immediate attention to repair the damaged parts.

Here is how to repair your vehicle after a collision:

1. Painting

In most cases, the paintwork of your car may be scratched, chipped, or scuffed following a collision. When it happens, the surface of the vehicle gets tattered against another hard surface. This makes the paint come off. This means you will have to repaint your car to make it look better in case the paint has been completely removed by the collision. You can use a high-end product like Nexgen ceramic spray. Check out car care reviews for the best sprays. You can check out torque detail reviews to compare the products.

2. Dents

The way a dent is fixed will depend on how severe the metal bodywork of your vehicle has been damaged. If the dent is inverted over 90° angle, it means the entire section of the bodywork may need replacement. But if the dents aren’t severe, the mechanic will use a tool such as a stud welder or dent puller to suction the dent and put it back to its usual shape.

3. Frame straightening

When a vehicle’s framework has been significantly affected by a collision, the car will have to undergo frame straightening. Before the car goes through straightening, it has to be assessed by a technician. The technician will determine the cost and length of the whole frame straightening process. When it comes to frame straightening, technicians generally use various methods like hydraulics and chains to realign the impaired car framework.

4. Body panel replacement

This involves replacing the whole piece of the exterior framework of the car, including the door, trunk, or hood. This is only necessary if the car is dented badly to an extent that dent repair tools can’t fix it. The technician will get a body panel that will fit your vehicle’s make and model, and install it safely to replace the damaged panel.

5. Headlights

Replacing headlights is quite easy. Your mechanic will assess the headlights and see if the headlights should be replaced or not. It could be that only the bulbs need replacement, or that the whole headlight is damaged beyond repair and so it must be replaced.

6. Bumper replacement

One of the most common parts of the car that are more likely to get damaged due to collision is the bumper. If you don’t repair it immediately, it will worsen with time. Every time you will be driving your car, the bumper will vibrate, and if it is bent or loose, the damage will get worse. So you should take your car to professionals immediately so that they can assess the damage to the bumper and find the perfect way to handle it.

Similar Posts